seems like it could have some bad results.
really, if you are looking at these type of options, why not just use a tube, some kraft paper and some masking tape? tape the kraft to the tube, reverse roll the print similar to how they picture in their tutorial, and then tape it closed for a period of time.
personally, would feel safer reverse rolling a print in a 3-4" diameter than the what 1"- 1 1/2" diameter of that core.
$.02.
Flattening Prints
- halftonegraphics
- Art Freak
- Posts: 15372
- Joined: Wed Oct 20, 2010 7:10 pm
I broke something today, and I realized I should break something once a week.. - Warhol
1xRun Referral
1xRun Referral
Do you think the air that is around you prints is "acid free"? Or the tube it was shipped in, or the kraft paper it was rolled in? When you are looking for acid materials, you are looking for them for long term storage. You don't want to want your prints to come in contact with anything that is seeping acidic material, but in this case acid free is not a concern.lsmith55 wrote:Maybe not- I am far from an art care expert, but I know that when in doubt- acid free is the way to go. I don't think it would cause any issues, but I'm sure its still not good for it. Perhaps you could put tissue paper between the roller and the art?deadhead2k wrote:Do you think the acid free matters when it's only touching it for a very short time? I suppose I could I could surround the print in acid free paper so it never touches the actual blind?
Sorry, someone else might have more info than me...
-
- Member
- Posts: 7
- Joined: Thu Jan 15, 2004 2:00 am
That's what I was thinking. Do you have any input on the roller blind idea?summoner wrote:Do you think the air that is around you prints is "acid free"? Or the tube it was shipped in, or the kraft paper it was rolled in? When you are looking for acid materials, you are looking for them for long term storage. You don't want to want your prints to come in contact with anything that is seeping acidic material, but in this case acid free is not a concern.lsmith55 wrote:Maybe not- I am far from an art care expert, but I know that when in doubt- acid free is the way to go. I don't think it would cause any issues, but I'm sure its still not good for it. Perhaps you could put tissue paper between the roller and the art?deadhead2k wrote:Do you think the acid free matters when it's only touching it for a very short time? I suppose I could I could surround the print in acid free paper so it never touches the actual blind?
Sorry, someone else might have more info than me...
I think it is worth a shot, but would be worried that the roll was too tight for the size prints that we normally get. I have reverse rolled quite a few prints, and have never rolled them tighter than 3" in diameter (anything more scares me), and have only held the roll for about 30 seconds. I will usually do that from both the top and bottom edges, and they have always turned out fine.deadhead2k wrote:That's what I was thinking. Do you have any input on the roller blind idea?summoner wrote:Do you think the air that is around you prints is "acid free"? Or the tube it was shipped in, or the kraft paper it was rolled in? When you are looking for acid materials, you are looking for them for long term storage. You don't want to want your prints to come in contact with anything that is seeping acidic material, but in this case acid free is not a concern.lsmith55 wrote:Maybe not- I am far from an art care expert, but I know that when in doubt- acid free is the way to go. I don't think it would cause any issues, but I'm sure its still not good for it. Perhaps you could put tissue paper between the roller and the art?deadhead2k wrote:Do you think the acid free matters when it's only touching it for a very short time? I suppose I could I could surround the print in acid free paper so it never touches the actual blind?
Sorry, someone else might have more info than me...
Hopefully I'm not breathing in acid in my house and yes-I believe most quality kraft paper that is used for shipping is in fact acid-free. If that is what is typically used though, I'm not sure.summoner wrote:Do you think the air that is around you prints is "acid free"? Or the tube it was shipped in, or the kraft paper it was rolled in? When you are looking for acid materials, you are looking for them for long term storage. You don't want to want your prints to come in contact with anything that is seeping acidic material, but in this case acid free is not a concern.lsmith55 wrote:Maybe not- I am far from an art care expert, but I know that when in doubt- acid free is the way to go. I don't think it would cause any issues, but I'm sure its still not good for it. Perhaps you could put tissue paper between the roller and the art?deadhead2k wrote:Do you think the acid free matters when it's only touching it for a very short time? I suppose I could I could surround the print in acid free paper so it never touches the actual blind?
Sorry, someone else might have more info than me...
But you are right, long term storage is the crucial point. Which is why i said- "I don't think it would cause any issues."
Last edited by lsmith55 on Tue Feb 04, 2014 1:03 pm, edited 1 time in total.
Highly doubtful. I have yet to find a standard shipping kraft paper that is acid free. The tissue paper that is used, yes, may very well be acid free however.lsmith55 wrote:the kraft paper that is used for shipping is in fact acid-free.
-
- Member
- Posts: 7
- Joined: Thu Jan 15, 2004 2:00 am
I think I may run over to ikea this afternoon and find the roller blind with the thickest bar and give it a try on some less valuable prints.
You're probably right, but it does exist. Don't know what the standards are for gallerys and shipping facilities, but I'm sure it is too expensive.summoner wrote:Highly doubtful. I have yet to find a standard shipping kraft paper that is acid free. The tissue paper that is used, yes, may very well be acid free however.lsmith55 wrote:the kraft paper that is used for shipping is in fact acid-free.
- ErocAfellar
- Art Expert
- Posts: 4537
- Joined: Thu Jul 19, 2007 11:25 pm
glassine paper is often used for storage and shipping due to the pH neutralitylsmith55 wrote: Don't know what the standards are for gallerys and shipping facilities
HappaHaoli wrote:That is freaking Eroctic!
- coffeeemug
- Art Enthusiast
- Posts: 16
- Joined: Sun Jul 24, 2016 8:36 pm
- Location: California
wondering the outcome also. i have ironed prints on low heat before, always depended on the paper though.khetti wrote:Bumping this again to see how the OP made out with the roller blind -- or if anyone else has any inputs!
Hey guys,
Similar to the thread here I have used a roll of Mylar (that I bought for another use) to flatten some prints right from the shipping tube. The Mylar came on it's own tube that has about a 4" diameter. The Mylar is stiff enough to support the print without buckling. Works well but the thicker paper used on a Mondo style print causes a slight hump that occurs where the layers overlap. This results in a shadow visible only from the back. To be clear it is not a crease. I expect this will disappear when the paper fully relaxes over time. Not noticeable from the front, even in racking light.
The roll cost me about $60
Similar to the thread here I have used a roll of Mylar (that I bought for another use) to flatten some prints right from the shipping tube. The Mylar came on it's own tube that has about a 4" diameter. The Mylar is stiff enough to support the print without buckling. Works well but the thicker paper used on a Mondo style print causes a slight hump that occurs where the layers overlap. This results in a shadow visible only from the back. To be clear it is not a crease. I expect this will disappear when the paper fully relaxes over time. Not noticeable from the front, even in racking light.
The roll cost me about $60