Jerry's Artarama: Picturesque Presentation Portfolio - 24x36
^ if your close to the border setup a free USA shipping address right beside the border and go and pick it up yourself. I think shipping to Canada is like $80-100, then prob $30 fees at the door. Saved around $150 CDN that way.
BTW, I just picked up new inserts for my Portfolio and they are about 1/4 wider and maybe 1/8 of an inch taller then they were previously... I guess they listened to feedback about the inserts being a lil too tight to fit in the 24x36 prints. Prints slide in no prob at all now
BTW, I just picked up new inserts for my Portfolio and they are about 1/4 wider and maybe 1/8 of an inch taller then they were previously... I guess they listened to feedback about the inserts being a lil too tight to fit in the 24x36 prints. Prints slide in no prob at all now
Not a bad idea and glad to hear they improved the inserts. I know I posted this in another thread but this is probably a more suitable place, has anyone seen or tried this http://www.deserres.ca/en-ca/search/nob ... o/FCPFPOC/ looks like it might be a decent option for anyone in Canada?
- soupysound
- EB Team
- Posts: 4136
- Joined: Wed Apr 25, 2012 9:38 pm
i own a picturesque presentation case (24x36) and am in the market for a new one. was wondering if there was anything better to store larger prints. as some have stated, some 24x36 prints don't fit and/or hang out the end. if they fixed the issue with larger sleeves, then maybe that should work?
can you post a pic of that? I always hate that I have to be SO CAREFUL to not bend a corner with these.prevone wrote:^ if your close to the border setup a free USA shipping address right beside the border and go and pick it up yourself. I think shipping to Canada is like $80-100, then prob $30 fees at the door. Saved around $150 CDN that way.
BTW, I just picked up new inserts for my Portfolio and they are about 1/4 wider and maybe 1/8 of an inch taller then they were previously... I guess they listened to feedback about the inserts being a lil too tight to fit in the 24x36 prints. Prints slide in no prob at all now
- AliRock110
- Art Expert
- Posts: 1294
- Joined: Mon Nov 30, 2015 5:41 pm
Super green Noob here. I want to get my stuff out of tubes real bad(I've had some DF Marvel prints sitting in a closet tubed up for like a decade) and I was hoping Jerry's PPP was going to be my solution. Seeing a pic of the new sleeves will help me make a better informed decision. Thanks for all the help.
- soupysound
- EB Team
- Posts: 4136
- Joined: Wed Apr 25, 2012 9:38 pm
i can confirm the 24x36 five page refills from jerrys artarama (for picturesque presentation portfolio cases) are now a bit larger than 24x36. i just ordered a refill and the new sleeves can fit a couple of my 24x36 prints that were too big to fit in the original sleeves. they slid right in with no issues. there is now a bit of room at the bottom so your prints don't hang out.
Yeah, I have them myself - you can tell the difference in that it's a more matte finish. But it's DEFINITELY better sized, way easier to slide two prints in (both sides) and leaves you enough wiggle room for 24x36.AliRock110 wrote:Super green Noob here. I want to get my stuff out of tubes real bad(I've had some DF Marvel prints sitting in a closet tubed up for like a decade) and I was hoping Jerry's PPP was going to be my solution. Seeing a pic of the new sleeves will help me make a better informed decision. Thanks for all the help.
35mmpaul wrote:We are addicted to things that hurt our butts.
- AliRock110
- Art Expert
- Posts: 1294
- Joined: Mon Nov 30, 2015 5:41 pm
Thank you very much gentlemen, looks like I'll be grabbing up a PPP and about 30 sheets.
- AliRock110
- Art Expert
- Posts: 1294
- Joined: Mon Nov 30, 2015 5:41 pm
Just ordered my triple P and and some sheets to get my stuff out of tubes. Wish me luck on the process of flattening and bagging my prints.
- AliRock110
- Art Expert
- Posts: 1294
- Joined: Mon Nov 30, 2015 5:41 pm
More questions regarding the triple P-24x36. I'm looking to bag my prints and slip a backing board into the PPP and the bagged print in front of that. Is that possible with the PPP for 24X36 prints? Are these good backing boards to order?
https://www.bagsunlimited.com/p-5489-ba ... 36-14.aspx
And lastly will I have to trim that back to match the PPP slipcover? Any feedback would be greatly appreciated.
https://www.bagsunlimited.com/p-5489-ba ... 36-14.aspx
And lastly will I have to trim that back to match the PPP slipcover? Any feedback would be greatly appreciated.
- MrWorldWide
- Art Connoisseur
- Posts: 198
- Joined: Sun Mar 15, 2015 3:11 pm
Just bought one recently, freakin awesome ... love it. Just put like 20 or so prints in very quickly all 24x36
- AliRock110
- Art Expert
- Posts: 1294
- Joined: Mon Nov 30, 2015 5:41 pm
That is the 1,000,000 dollar question my large helmeted friend.cotis wrote:do the prints stick out on the 24x36 sleeves?MrWorldWide wrote:Just bought one recently, freakin awesome ... love it. Just put like 20 or so prints in very quickly all 24x36
- MrWorldWide
- Art Connoisseur
- Posts: 198
- Joined: Sun Mar 15, 2015 3:11 pm
No. tho i never had an older version to really know what you all are talking about. But I guess since the prints dont stick out it means its new. *shrug*