I've got a print that I would like to unload, but the trick is that it's custom framed. I really don't want to dismantle the frame just to get it out, so I reach out to you, EB, what is the best way to ship a framed print? Any suggestions would be greatly appreciated!
Thanks,
Seeker
How do you ship a print flat?
- jamesgunter
- Art Expert
- Posts: 5250
- Joined: Sun Jun 10, 2007 12:00 am
- Location: Birmingham, Al
- Contact:
done it many times... can i just say... ITS A PAIN IN THE ASS!
it has to be packed WELL, and its EXPENSIVE! i would ship unframed any day over the hassle of shipping a framed print!
if you HAVE to do it, just PACK IT WELL!!! i use multiple layers of bubble wrap over the print, then i add corner protecters, put it in a HUGE box, add Styrofoam popcorn around that, and in the end it ends up costing me about $120 to ship.
it has to be packed WELL, and its EXPENSIVE! i would ship unframed any day over the hassle of shipping a framed print!
if you HAVE to do it, just PACK IT WELL!!! i use multiple layers of bubble wrap over the print, then i add corner protecters, put it in a HUGE box, add Styrofoam popcorn around that, and in the end it ends up costing me about $120 to ship.
- mistersmith
- Art Freak
- Posts: 13562
- Joined: Sat Nov 17, 2007 5:09 am
- Location: SF, CA
Dude, it's not so hard. Find a box at your office that fits, or go buy a mirror box from a moving store, UPS/FedEx store, whatever. Then, if your glazing is real glass, put a tic-tac-toe board of the really expensive blue masking tape on there in case there's a crack in shipping. Then, slip the frame into a polybag (or trash bag if you have to) and tape that closed real nice. Bubble wrap that bastard real good, slip all that into the box with a bunch of peanuts. No problem.
But a serious bump can still dislodge whatever mounting system you used, so, nothing's perfect. But you'll be fine.
But a serious bump can still dislodge whatever mounting system you used, so, nothing's perfect. But you'll be fine.
Take this man at his word:electrachrome, mostly kidding wrote:mr smith, EB's poet laureate.
misterx wrote:Don't enter into discourse with me.
Have to agree with Smith, not too difficult. From my experience, the best boxes for this are sold at FedEx (roughly $10). These are dedicated art boxes ... if you go look at one, you will see why. Be sure to use the Z-fold cardboard on the inside that keeps the art from touching the walls of the box. I ship using USPS, but get the supplies at FedEx.
- HappaHaoli
- Art Expert
- Posts: 5533
- Joined: Sun Sep 05, 2010 12:01 am
- Location: a place without a postcard
tpeazy is the gold standard in shipping prints flat! Maybe these will give you some ideas... like the paper corners. Good luck.
x6 x2
"I had this dream where I relished the fray, and the screaming filled my head all day."
"I had this dream where I relished the fray, and the screaming filled my head all day."
Just received this from Stanley Mouse - not often I get a print flat packed from accross the pond, especially without asking for it to be done. The poster was very well protected with minimal packaging: The poster held in a large polyester sleeve, which was folded in half with the poster in one side and a backing card in the other, then encased in two sheets of thick card, with a few reinforcement strips and lots of tape...poster arrived minty fresh...
Outer packaging: Inner packaging:
Outer packaging: Inner packaging:
UK Member? Reclaim some VAT... http://forum.expressobeans.com/viewtopi ... =8&t=85994
shut your mouth and open your mind
shut your mouth and open your mind