I once ordered a mixed thing of Yazoo tubes (3"/4"), and they came in the same kind of box.mcnail wrote:You didn't accidentally buy the light-duty handout tubes did you?
Mark Englert?
pewter14 wrote:You're not the only one on the hunt for The Thing ... just ... the most obvious ... by a lot.
- jamesmassey1988
- Art Expert
- Posts: 4458
- Joined: Sun Jul 31, 2011 8:26 pm
- Location: Southsea, UK
I believe they're 18" long, and 3" or 4" diameter. I swear something was posted. Might have been in Mark's FB Group, though.
TWTTR - @masseyjh
INSTGRM - @jimmassey
![Ziggi :ziggi:](./images/smilies/ziggi.gif)
INSTGRM - @jimmassey
![Ziggi :ziggi:](./images/smilies/ziggi.gif)
- markenglert
- Art Expert
- Posts: 3078
- Joined: Fri Nov 20, 2009 7:50 pm
- Location: Lake Arrowhead, CA
- Contact:
They are 3x18 shipping tubes... They had to deliver them in "cartons" since they were being delivered to my residence and not an office.
I don't think the handout tubes are even offered in that size.
I'll take some comparison tube pics in a bit![Razz :P](./images/smilies/icon_razz.gif)
I don't think the handout tubes are even offered in that size.
I'll take some comparison tube pics in a bit
![Razz :P](./images/smilies/icon_razz.gif)
Ah, cool.markenglert wrote:They are 3x18 shipping tubes... They had to deliver them in "cartons" since they were being delivered to my residence and not an office.
I don't think the handout tubes are even offered in that size.
I'll take some comparison tube pics in a bit
- markenglert
- Art Expert
- Posts: 3078
- Joined: Fri Nov 20, 2009 7:50 pm
- Location: Lake Arrowhead, CA
- Contact:
Bigger tube is from Mondo, my Totoro(reg) came in that one, I believe:
![Image](http://www.markenglert.com/ebeans/DSCF7095.jpg)
![Image](http://www.markenglert.com/ebeans/DSCF7097.jpg)
Wall thickness is the same, but looks like I missed out on the fancy Yazoo Mills stamp on the inside:
![Image](http://www.markenglert.com/ebeans/DSCF7096.jpg)
Also, my plastic caps came separately in a big box of their own.
![Image](http://www.markenglert.com/ebeans/DSCF7095.jpg)
![Image](http://www.markenglert.com/ebeans/DSCF7097.jpg)
Wall thickness is the same, but looks like I missed out on the fancy Yazoo Mills stamp on the inside:
![Image](http://www.markenglert.com/ebeans/DSCF7096.jpg)
Also, my plastic caps came separately in a big box of their own.
Last edited by markenglert on Sun Mar 25, 2012 7:10 pm, edited 1 time in total.
- markenglert
- Art Expert
- Posts: 3078
- Joined: Fri Nov 20, 2009 7:50 pm
- Location: Lake Arrowhead, CA
- Contact:
In person, the GID is noticeable, but subtle enough that unless you know what you are looking for, or have a reg right next to it, you wouldn't notice it much. As far as the particular ink, I defer to the printer's knowledge and I trust that guy to no end.KSUvet wrote:That's kind of the way I felt about the preview image on p. 56, but I figured it was more of a photography issue than a print issue. You really have to have a tripod and long exposure to capture it well in my exerience. What is the plan for this, if you don't mind me asking? I assume it involves a re-draw somehow since I don't think you can just make the ink "glow more." It may be a bit of a catch-22. If you make the cloud stuff more prominent for the dark, you may lose the subtle quality in the day. But what the hell do I knowmarkenglert wrote:Hm, after trying to take pics of det er en slags ting GID, I've decided to have that re-made as well... I want to beef that up a bit so you can more easily tell what it is.
Right now, the explosion is the only thing the reads well and if you really look hard, you can make out the rest... I want it to be like, "Whoa!" and not like, "Huh? Oh, I think... ohhhh."? I think we all appreciate that you're trying to get the most out of these.
I would rather notice it a bit more and be wowed when it glows, then barely notice it in the day and night.
I sent a beefed up version to the printer last night(I don't have to redraw the whole thing to beef it up
![Razz :P](./images/smilies/icon_razz.gif)
Good point.markenglert wrote: I would rather notice it a bit more and be wowed when it glows, then barely notice it in the day and night.
Yep, clearly doesn't care about quality or customer satisfaction.Brody wrote:No fancy yazoo stamp? Mark, mark, I may have to rethink my order...
![Razz :P](./images/smilies/icon_razz.gif)
"I see dudes using cotton gloves on prints that I know were printed while someone was drinking a beer or eating Cheetos, while water leaked from the ceiling. And I'm not even talking about my shop!" - alexfugazi
sorry to derail the thread a bit, but since we're on the topic of yazoo mills tubes, I was looking at their tubes on their site and noticed that these are listed as "Light-Duty Handout Tubes"
![Image](http://www.yazoomills.com/SiteAssets/image/light_duty_handout_tubes_img.jpg)
Is that really the case there? The ones with the white lining inside are considered 'handout' tubes? Cause in person, they seem pretty thick and are thicker than your standard Uline tube it seems.
![Image](http://www.yazoomills.com/SiteAssets/image/light_duty_handout_tubes_img.jpg)
Is that really the case there? The ones with the white lining inside are considered 'handout' tubes? Cause in person, they seem pretty thick and are thicker than your standard Uline tube it seems.
- markenglert
- Art Expert
- Posts: 3078
- Joined: Fri Nov 20, 2009 7:50 pm
- Location: Lake Arrowhead, CA
- Contact:
It all has to do with the thickness of the tube... "handout" tubes wouldn't have to go through the rigors of shipping, so they wouldn't need to be as sturdy. No need to pay for heavy duty tubes if you are just storing blueprints or handing out posters at an event.
They have all sorts of options on the site, I just went straight to the heavy duty shipping tubes section and got the size that IJ suggested I get.
They have all sorts of options on the site, I just went straight to the heavy duty shipping tubes section and got the size that IJ suggested I get.
Can't wait to get mine
, been looking forward to it all month ![Pint :pint:](./images/smilies/pint.gif)
![Drool :drool:](./images/smilies/drool3.gif)
![Pint :pint:](./images/smilies/pint.gif)
High quality poster weights, Star Wars Poster Weights. http://corkys.bigcartel.com (Use KeyLoC as a referral)
- markenglert
- Art Expert
- Posts: 3078
- Joined: Fri Nov 20, 2009 7:50 pm
- Location: Lake Arrowhead, CA
- Contact:
"we have about seven minutes to live"
18x24, 4 colors, WIP:
![Image](http://www.markenglert.com/ebeans/we-have-about-seven-minutes-to-live.jpg)
18x24, 4 colors, WIP:
![Image](http://www.markenglert.com/ebeans/we-have-about-seven-minutes-to-live.jpg)
That's how I would want to spend my last 7 minutes... but without the pony tail ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)