Ah, right on. Thanks. That's a cool way of framing.sixstringer wrote:I'm doing one here coming up and I've never done it.CrustaR wrote:How would you float a print so that it actually has the float effect like where the artwork is raised up a bit?
http://www.frametek.com/HTML/Articles/F ... nting.html
Floating a Print
pewter14 wrote:You're not the only one on the hunt for The Thing ... just ... the most obvious ... by a lot.
As far as this Japanese hinging paper goes, is there a possibility of damaging the print when using it?
pewter14 wrote:You're not the only one on the hunt for The Thing ... just ... the most obvious ... by a lot.
yes if you get it too wet, you could conceivably get the print paper too wet.............having said that, you would have to be pretty out of it to wet the hinge that much and then apply it to print.
I highly recommend messing around with hinging paper on some scrape material first, you will quickly get an idea of how much water is not enough and what would obviously be to much. The amount needed to properly wet the adhesive is far from enough to do any damage.
Edit....just to be clear, I am talking about using the Hayaku pre-gummed Japanese Hinging Paper from Lineco. I think using wheat starch and mulberry paper, could be a considerably trickier endeavor.....
I highly recommend messing around with hinging paper on some scrape material first, you will quickly get an idea of how much water is not enough and what would obviously be to much. The amount needed to properly wet the adhesive is far from enough to do any damage.
Edit....just to be clear, I am talking about using the Hayaku pre-gummed Japanese Hinging Paper from Lineco. I think using wheat starch and mulberry paper, could be a considerably trickier endeavor.....
Last edited by mazdog on Thu Jun 23, 2011 3:00 pm, edited 1 time in total.
Oh, yeah, I've got some $0 prints I can test this out on.
Another random Q about floating a print:
As far as the frame/glass size goes in relation to the print, is a 10% increase suitable, so for say a 24x36 print, you would use a 26x39 frame?
Apologies for all the questions, but I just like to be sure I am doing everything right.
Another random Q about floating a print:
As far as the frame/glass size goes in relation to the print, is a 10% increase suitable, so for say a 24x36 print, you would use a 26x39 frame?
Apologies for all the questions, but I just like to be sure I am doing everything right.
pewter14 wrote:You're not the only one on the hunt for The Thing ... just ... the most obvious ... by a lot.
There is no right or wrong. Go with what looks good to your eye. It could very from print to print. I usually just add a few inches on the sides.CrustaR wrote:Oh, yeah, I've got some $0 prints I can test this out on.
Another random Q about floating a print:
As far as the frame/glass size goes in relation to the print, is a 10% increase suitable, so for say a 24x36 print, you would use a 26x39 frame?
Apologies for all the questions, but I just like to be sure I am doing everything right.
"The secret to creativity is knowing how to hide your sources." - Albert Einstein
- FramerDave
- Art Connoisseur
- Posts: 355
- Joined: Tue Jun 21, 2011 1:25 pm
- Location: Houston
Absolutely correct, the biggest danger is using too much paste on the hinge and applying it to the artwork too wet. The paper will absorb the moisture and cockle. Not quite the end of the world, but it's certainly unsightly.mazdog wrote:yes if you get it too wet, you could conceivably get the print paper too wet.............having said that, you would have to be pretty out of it to wet the hinge that much and then apply it to print.
I highly recommend messing around with hinging paper on some scrape material first, you will quickly get an idea of how much water is not enough and what would obviously be to much. The amount needed to properly wet the adhesive is far from enough to do any damage.
Edit....just to be clear, I am talking about using the Hayaku pre-gummed Japanese Hinging Paper from Lineco. I think using wheat starch and mulberry paper, could be a considerably trickier endeavor.....
When I'm hinging I always place the hinges on a small piece of cotton matboard when I apply the paste. It acts as a blotter, soaking up excess moisture. Then I wait a few moments for the paste to start drying out a little; when it no longer looks wet and glistening, then it's ready to go on the art. How long this takes will depend on how wet your paste is, temperature, humidity, the phase of the moon and how you stick your tingue out while doing it. Usually a minute at most.
Once you apply the hinge you still have to control moisture very carefully by placing a clean blotter (another piece of cotton mat) on top of the hing and then gently press on it to wick up the moisture. Once you've done this a few times place yet another clean blotter on it, place a weight on it (just a few ounces) and then leave it alone for about an hour. The blotter will help dry the hinge while the weight keeps it flat and prevents cockling. As the FrameTek site suggests, practice on some magazine and newspaper pages first. When you can hinge them with no problems you're good to go.
By the way, I rarely use the Pellon between the hinge and blotter. I figure that if your blotter is sticking, it's a sign you've used too much paste.
- sixstringer
- Art Expert
- Posts: 7329
- Joined: Sun Aug 01, 2010 1:29 pm
FramerDave -
When I get to the stage that I have my print mounted on the pedestal foam core how do I attach that to the backing material and get it nice and straight within the frame? Seems like if I used ATG tape I wouldn't be able to move it around for positioning.
When I get to the stage that I have my print mounted on the pedestal foam core how do I attach that to the backing material and get it nice and straight within the frame? Seems like if I used ATG tape I wouldn't be able to move it around for positioning.
- FramerDave
- Art Connoisseur
- Posts: 355
- Joined: Tue Jun 21, 2011 1:25 pm
- Location: Houston
You're right, and I NEVER trust ATG to hold for the long term. I've seen it turn gummy, ooze and give way too many times. Depending on how much preservation you want, you could use PVA (it's pretty much Elmer's white glue) or some leftover starch paste from your hinging. It doesn't take a lot, so no need to slather all over the place. Just dots of it. That way the whole thing sort of "floats" on the dots of glue until you get it where you want and apply a little bit of pressure. If you'd like, go ahead and use a few bits of ATG as well. That way you won't have to wait for the glue to dry to carry on the frame job.sixstringer wrote:FramerDave -
When I get to the stage that I have my print mounted on the pedestal foam core how do I attach that to the backing material and get it nice and straight within the frame? Seems like if I used ATG tape I wouldn't be able to move it around for positioning.
By the way, there's still some doubts in the minds of conservators about foam board. There is some concern over its long term stability and how that might affect artwork in the years to come. So if you have something you REALLY want to keep in good condition, use something like 8-ply matboard instead. Yes, I know it costs more...
- sixstringer
- Art Expert
- Posts: 7329
- Joined: Sun Aug 01, 2010 1:29 pm
Thanks...I have yet to buy any supplies so that's some good info.
- FramerDave
- Art Connoisseur
- Posts: 355
- Joined: Tue Jun 21, 2011 1:25 pm
- Location: Houston
My pleasure. The Grumble is fun and all, but it's fun to have other outlets too.CrustaR wrote:Cool, FramerDave. This is good info. Appreciate it.
And not that I have a filthy mouth but it's nice that I can say crap and dude here. Can't I? Sometimes they're very useful words.
FramerDave wrote:My pleasure. The Grumble is fun and all, but it's fun to have other outlets too.CrustaR wrote:Cool, FramerDave. This is good info. Appreciate it.
And not that I have a filthy mouth but it's nice that I can say crap and dude here. Can't I? Sometimes they're very useful words.
you should type the f-word for some real drymounting fun.
maden wrote:Never apologize on the internet.
gonzo303 wrote:This is Gonzos mom
[quote="FramerDave... How long this takes will depend on how wet your paste is, temperature, humidity, the phase of the moon and how you stick your tingue out while doing it. Usually a minute at most.
...[/quote]
That's in dry conditions... sometimes during humid weather you have to wait quite a bit longer... maybe up to five minutes.
...[/quote]
That's in dry conditions... sometimes during humid weather you have to wait quite a bit longer... maybe up to five minutes.
- FramerDave
- Art Connoisseur
- Posts: 355
- Joined: Tue Jun 21, 2011 1:25 pm
- Location: Houston
That's in dry conditions... sometimes during humid weather you have to wait quite a bit longer... maybe up to five minutes.[/quote]Vid1286 wrote:[quote="FramerDave... How long this takes will depend on how wet your paste is, temperature, humidity, the phase of the moon and how you stick your tingue out while doing it. Usually a minute at most.
...
Possibly. Like I said, it depends on a lot of factors. I've also seen a really wide range of how wet different framers make their paste, ranging from runny and the consistency of heavy cream to something resembling tapioca pudding.
I did some hinging one time when I was in Denver and the hinges were almost too dry before I could even get them on the artwork.