This. The only prints I separate with glassine are the hand-sprayed or hand-finished prints and prints with higher value.Yamar wrote:I'll be one of those voices that say that layering all of your prints with glassine/mylar/etc. is a bit of overkill. I have about 20 drawers of storage currently running and I layer only higher end/price items personally. Granted, I'd put the vast majority of the 2000+ prints in the office as having a market value of $30 or less, so it's not really a big thing/concern for me compared to many others. Just saying that a number of those items have been in the files and (gasp!) touching each other for 5-10 years with no ill effects...
Flat File Corner - Tips, Questions, Answers, Etc.
- earlgreytoast
- Art Expert
- Posts: 9373
- Joined: Fri Nov 05, 2010 1:14 pm
Codeblue wrote: I’m sorry for everything.
Hey all,
I've been reading through all of the posts and gathering differing methods/opinions on how to store prints in your flat file. Having just bought a flat file of my own (finally), here is the route I'm thinking of taking:
Put down a piece of acid-free foamcore on the bottom of the drawer. Put each flattened print in a Crystal Clear art bag (http://www.framedestination.com/bags/pr ... em/BGPRBA/) and stack these individually sleeved prints on top of each other. I don't plan on using framing corners and mounting each print to foamcore inside each sleeve.
Do you guys think this method will suffice for safe archival storage of my art? I was going to order some acid free tissue as well (http://www.framedestination.com/tissue/ ... 000536500/) to use to lay on top of prints when flattening them, would it be overkill, as some have said, to put a sheet in between each stacked print?
I've been reading through all of the posts and gathering differing methods/opinions on how to store prints in your flat file. Having just bought a flat file of my own (finally), here is the route I'm thinking of taking:
Put down a piece of acid-free foamcore on the bottom of the drawer. Put each flattened print in a Crystal Clear art bag (http://www.framedestination.com/bags/pr ... em/BGPRBA/) and stack these individually sleeved prints on top of each other. I don't plan on using framing corners and mounting each print to foamcore inside each sleeve.
Do you guys think this method will suffice for safe archival storage of my art? I was going to order some acid free tissue as well (http://www.framedestination.com/tissue/ ... 000536500/) to use to lay on top of prints when flattening them, would it be overkill, as some have said, to put a sheet in between each stacked print?
I actually do that too!
nelson, I think the most important thing you are doing is purchasing bags. I skip the foamcore personally, but go for it if you feel its needed...
nelson, I think the most important thing you are doing is purchasing bags. I skip the foamcore personally, but go for it if you feel its needed...
- SurfingJeff
- Art Expert
- Posts: 2264
- Joined: Sat Jul 09, 2011 6:46 pm
- Location: Manhattan Beach, CA
- Contact:
Yeah - the foamcore is going to eat up space very quickly. I would skip it for most prints, and maybe look into backing boards for higher value items.EG8 wrote:I actually do that too!
nelson, I think the most important thing you are doing is purchasing bags. I skip the foamcore personally, but go for it if you feel its needed...
T.H.C.
- someasiandude
- Art Expert
- Posts: 1737
- Joined: Thu May 10, 2012 11:52 pm
- Location: Georgia
- SurfingJeff
- Art Expert
- Posts: 2264
- Joined: Sat Jul 09, 2011 6:46 pm
- Location: Manhattan Beach, CA
- Contact:
They are called "depressors" and they are supposed to hold your prints flat so that they don't snag while opening/closing the drawer. In theory, you would flip the depressor back, put your prints in, and then carefully set the depressor back on top of everything. Personally, I'm always a worried that they are going to harm my prints, so I don't actually use them. I just lay a backing board on top of the stack to keep everything flat and snag free.
T.H.C.
- someasiandude
- Art Expert
- Posts: 1737
- Joined: Thu May 10, 2012 11:52 pm
- Location: Georgia
Thanks for the advice, I was thinking of doing that exact thing..just in case the things would harm the prints if they had to be in. I tried removing them they are one with the drawer. I found that it is a Safco Flat file too.SurfingJeff wrote:They are called "depressors" and they are supposed to hold your prints flat so that they don't snag while opening/closing the drawer. In theory, you would flip the depressor back, put your prints in, and then carefully set the depressor back on top of everything. Personally, I'm always a worried that they are going to harm my prints, so I don't actually use them. I just lay a backing board on top of the stack to keep everything flat and snag free.
- silentbob82
- Art Enthusiast
- Posts: 94
- Joined: Fri Mar 07, 2014 3:24 am
My addiction hasn't gotten to the point of needing a flat file. Is it ok to keep my prints between two foam boards and what would be the proper way to do so? The inked sides facing away from or towards each other and how many can I place between each set of foam boards?
- DonPiano
- Art Expert
- Posts: 8473
- Joined: Thu Jan 31, 2013 8:42 am
- Location: Perth, Nowhere Australia.
You can use a foam board sandwich.silentbob82 wrote:My addiction hasn't gotten to the point of needing a flat file. Is it ok to keep my prints between two foam boards and what would be the proper way to do so? The inked sides facing away from or towards each other and how many can I place between each set of foam boards?
So, it goes like this...
foam board
kraft paper
glassine
glassine
glassine
kraft paper
foam board
Then use bulldog clips to keep them together.
The Curb
Friends and Like-Minded Souls of webuyyourkids Facebook Group
Hotdogs are not sandwiches.
Friends & Family don't let Friends & Family send money via Friends & Family.
Friends and Like-Minded Souls of webuyyourkids Facebook Group
Hotdogs are not sandwiches.
Friends & Family don't let Friends & Family send money via Friends & Family.
- silentbob82
- Art Enthusiast
- Posts: 94
- Joined: Fri Mar 07, 2014 3:24 am
Thanks for the help. I can see my addiction getting real bad... My wife says we can frame one every couple of weeks. Framing will cost more than the prints. lolDonPiano wrote:You can use a foam board sandwich.silentbob82 wrote:My addiction hasn't gotten to the point of needing a flat file. Is it ok to keep my prints between two foam boards and what would be the proper way to do so? The inked sides facing away from or towards each other and how many can I place between each set of foam boards?
So, it goes like this...
foam board
kraft paper
glassine
glassine
glassine
kraft paper
foam board
Then use bulldog clips to keep them together.
- DonPiano
- Art Expert
- Posts: 8473
- Joined: Thu Jan 31, 2013 8:42 am
- Location: Perth, Nowhere Australia.
Where are you based? If you're in the US there's a bunch of framing places that can do it for you cheap. Just don't let the hobby get the better of you. Keep this in mind: you do not need every print that is released and if you don't get that print you really must have, just wait and be patient and it'll come to a price which is affordable. It's good having a flat file for sure, but the problem is is that you buy a print, it arrives, you look at it and smile and then put it in your drawer and that's it til you put another print in there and go 'wow, didn't realise I had that'.
The Curb
Friends and Like-Minded Souls of webuyyourkids Facebook Group
Hotdogs are not sandwiches.
Friends & Family don't let Friends & Family send money via Friends & Family.
Friends and Like-Minded Souls of webuyyourkids Facebook Group
Hotdogs are not sandwiches.
Friends & Family don't let Friends & Family send money via Friends & Family.
- SurfingJeff
- Art Expert
- Posts: 2264
- Joined: Sat Jul 09, 2011 6:46 pm
- Location: Manhattan Beach, CA
- Contact:
For anyone looking for backing boards, you can get a pretty good price on Jerry's for the next few days. If you add two packs of these, and then use coupon code 'DSTB' you get 30% off + free shipping. The total price comes out to $165.50 shipped, which is $3.31/board. I don't think it gets much cheaper than that.
T.H.C.